> koehler toilets

Constant temperature bath series with advanced temperature control circuitry and integrated timing features for convenient, accurate glass capillary viscometry determinations. Microprocessor PID circuitry assures precise, reliable temperature control within ASTM-specified tolerances throughout the operating range of the bath. Simple push-button controls and dual digital displays permit easy setting and monitoring of bath temperature. Two-place calibration offset capability is provided. Baths accommodate seven glass capillary viscometers of various types. Viewing the viscometers is made easy by glare-free fluorescent illumination inside the bath and a baffle that provides a background for easy viewing. Temperature control uniformity is assured by means of motorized stirrer that provides complete circulation without turbulence. Connection of the built-in cooling coil to tap water or a recirculating water chiller facilitates temperature control at ambient or below ambient temperatures. Conforms to the specifications of: ASTM D445, D2170, D6074, D6158; IP 71, 319; ISO 3104; DIN 51500; FTM 791-305; NF T 60-100. Temperature Range: Ambient to 150 degrees C (302 degrees F); -20 degrees C to 150 degrees C (-4 degrees F to 302 degrees F) with an external chiller. Volume, Bath 82017-698: 22 L (5.8 gal.) Baths 37000-166, -170: 33.7 L (8.9 gal.) Dimensions, Bath 82017-698: 51L x 39W x 62H cm (201/4 x 151/4 x 241/2") Baths 37000-166, -170: 51L x 39W x 77H cm (201/4 x 151/4 x 301/2") Ordering Information: For information about communications software, ramp-to-set, and other enhanced features, contact your eGM sales representative. VWR offers validation services including IQ, OQ, and PQ protocol development and execution (in US only);

Single phase, constant temperature bath for kinematic viscosity testing of petroleum products. Accommodates six round 51mm (2") diameter viscometer holders. Bath temperature stabilizes within +-0.5 degrees C (+-1 degrees F) of setting, and final adjustment to within +-0.1 degrees C (+-0.02 degrees F) can be made. Test temperatures of up to 150 degrees C (302 degrees F) can be selected. Temperature limit control permits the operator to select an over-temperature cutoff point to protect against accidental overheating. Control unit includes immersion heater, circulating stirrer, and temperature probe. Composition top plate rests on a 30.5x30.5cm (12x12") or 30.5x46cm (12x18") PYREX jar. Capillary viscometers, viscometer holders, and thermometer not included. VWR offers validation services including IQ, OQ, and PQ protocol development and execution (in US only);

Used to determine oxidation stability of mineral insulating oils by measuring the amount of sludge and acid formed under prescribed accelerated aging conditions. Device has a capacity of six samples, oxygenated by six independent flowmeters mounted on a common manifold. Insulated double-wall stainless steel bath features microprocessor temperature control with degrees C/ degrees F switchable digital set point and display. Built-in control circuit interrupts power to the unit if bath temperature exceeds a programmed cut-off point. Meets ASTM D2440 specifications. Bath Capacity/Medium: 9.5 L (2.5 gal) of white technical oil Temperature Range: Ambient to 127 degrees C (260 degrees F) Dimensions: 36 x 38 x 56 cm (14 x 15 x 22") Shipping Weight: 27.7 kg (61 lbs.)

Used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Apparatus performs hands-free aniline point and mixed aniline point determinations automatically by means of a modified thin film technique (ASTM D611 Method E). The sample is heated by a platinum immersion heater and the aniline point is detected photoelectrically . Temperature is displayed on a large LED indicator. Built-in pressure regulator and solenoid valve permit quicker cooling cycles and determination of subambient aniline point temperatures. Cabinet exterior surfaces have a chemical- resistant polyurethane enamel finish. Standard borosilicate glass test cell with drain is provided. Conform to specifications: ASTM D611, IP 2, ISO 2977, DIN 51775, FTM 791-3601, NF M 07-021. Testing Range: 0 to 150 degrees C (32 to 302 degrees F) Temperature Display: 0 to 999.9 degrees C Dimensions: 37L x 22W x 53H cm (141/2 x 81/2 x 203/4") Shipping Weight: 21 kg (46 lbs.)

Tests the corrosiveness of liquid petroleum gases to copper by immersion in a heated test cylinder. Apparatus submerges LPG corrosion test cylinders in an upright position into a water bath controlled at 38 degrees C (100 degrees F) per ASTM specifications. Soxhlet reflux condenser and constant water level device maintain proper working depth. Unit features polished stainless steel double-wall construction. Conforms to specifications: ASTM D1838, GPA 2140, ISO 6251. Capacity: 4 test cylinders Maximum Temperature: 105 degrees C (221 degrees F) Temperature Stability: +-0.5 degrees C (+-1 degrees F) Bath Volume/Medium: 14.4 L (3.8 gal.) of water Dimensions: 30L x 25W x 61H cm (12 x 10 x 24") Shipping Weight: 12.2 kg (27 lbs.)

Provides an indication of the deposit-forming tendencies of fuels by determining the volume of carbon residue left after evaporation and pyrolysis of a sample oil. Cast-iron block type coking furnace features microprocessor temperature control with degrees C/ degrees F switchable digital set point and display. Stainless steel cabinet is heavily insulated with a three-layer refractory top for excellent heat retention. Built-in control circuit automatically interrupts power if the block temperature exceeds the programmed cutoff point. Conforms to specifications: ASTM D524, D6074; IP 14; ISO 4262; FTM 791- 5002. Capacity: 5 coking bulbs Maximum Temperature: 650 degrees C (1200 degrees F) Controller Sensitivity: +-1 degrees C (+-2 degrees F) Dimensions: 41L x 55W x 37H cm (16 x 211/2 x 141/2") Shipping Weight: 33.1 kg (73 lbs.)

Used to characterize pure hydrocarbons and to indicate the aromatic content of hydrocarbon mixtures. Apparatus performs hands-free aniline point and mixed aniline point determinations automatically by means of a modified thin film technique (ASTM D611 Method E). The sample is heated by a platinum immersion heater and the aniline point is detected photoelectrically . Temperature is displayed on a large LED indicator. Built-in pressure regulator and solenoid valve permit quicker cooling cycles and determination of subambient aniline point temperatures. Cabinet exterior surfaces have a chemical- resistant polyurethane enamel finish. Standard borosilicate glass test cell with drain is provided. Conform to specifications: ASTM D611, IP 2, ISO 2977, DIN 51775, FTM 791-3601, NF M 07-021. Testing Range: 0 to 150 degrees C (32 to 302 degrees F) Temperature Display: 0 to 999.9 degrees C Dimensions: 37L x 22W x 53H cm (141/2 x 81/2 x 203/4") Shipping Weight: 21 kg (46 lbs.)

Provides an indication of the deposit-forming tendencies of fuels by determining the volume of carbon residue left after evaporation and pyrolysis of a sample oil. Cast-iron block type coking furnace features microprocessor temperature control with degrees C/ degrees F switchable digital set point and display. Stainless steel cabinet is heavily insulated with a three-layer refractory top for excellent heat retention. Built-in control circuit automatically interrupts power if the block temperature exceeds the programmed cutoff point. Conforms to specifications: ASTM D524, D6074; IP 14; ISO 4262; FTM 791- 5002. Capacity: 5 coking bulbs Maximum Temperature: 650 degrees C (1200 degrees F) Controller Sensitivity: +-1 degrees C (+-2 degrees F) Dimensions: 41L x 55W x 37H cm (16 x 211/2 x 141/2") Shipping Weight: 33.1 kg (73 lbs.)

Used to determine oxidation stability of mineral insulating oils by measuring the amount of sludge and acid formed under prescribed accelerated aging conditions. Device has a capacity of six samples, oxygenated by six independent flowmeters mounted on a common manifold. Insulated double-wall stainless steel bath features microprocessor temperature control with degrees C/ degrees F switchable digital set point and display. Built-in control circuit interrupts power to the unit if bath temperature exceeds a programmed cut-off point. Meets ASTM D2440 specifications. Bath Capacity/Medium: 9.5 L (2.5 gal) of white technical oil Temperature Range: Ambient to 127 degrees C (260 degrees F) Dimensions: 36 x 38 x 56 cm (14 x 15 x 22") Shipping Weight: 27.7 kg (61 lbs.)

electrical: Penetrometer Software. koehler no.: K95500-SFW. Manufacturer: Koehler - Model K95500-SFW - Unit: Each This product may be an accessory for Digital Penetrometer, Koehler and may differ from the image shown. If you have any concerns, please contact us prior to placing your order., Manufacturer: Koehler

Koehler Instrument LPG Copper Strip Corrosion Test Apparatus, Koehler is a reliable and dependable addition to the Koehler Instrument Baths, Ovens, Incubators, and Cryogenics Storage family of products. Combining top-notch and uncompromising quality with an affordable price, the Koehler Instrument L

Koehler Instrument KV1000 Digital Constant Temperature Kinematic Viscosity Bath, Koehler Kinematic Viscosity Baths is a reliable and dependable addition to the Koehler Instrument Baths, Ovens, Incubators, and Cryogenics Storage family of products. Combining top-notch and uncompromising quality with an

Koehler Instrument KV1000 Digital Constant Temperature Kinematic Viscosity Bath, Koehler Kinematic Viscosity Baths is a reliable and dependable addition to the Koehler Instrument Baths, Ovens, Incubators, and Cryogenics Storage family of products. Combining top-notch and uncompromising quality with an

Determines flash points of liquid products by the Tag Closed Cup method. Electrically heated testers feature stepless variable heat control with reference dial for accurate repeat setting of temperature rate of rise per specifications. Also available with gas burner instead of electric heater. Precision machined cover mechanism simultaneously opens slide shutter and applies test flame to sample at the turn of a knob. Includes liquid bath with constant level overflow, brass test cup, plated brass thermometer ferrules, and test flame reference bead. Bath and cover mechanism are constructed of plated brass. Heater is enclosed in a cast aluminum base assembly. Dimensions: 13Lx13Wx41Hcm (5x5x16") with thermometers inserted. Shipping weight: 3.6kg (7lbs.). Meets ASTM D56 and related specifications.

This Rugged Utility Lantern Features A 120 Degree Pivoting Head, Glove Sized Handle And Switch; Plus A Dual Battery Compartment. The Lantern Features A 30,000 Beam Candlepower. Designed For Use In Division 1 Hazardous Locations. Ul, Csa And Msha Approved., Uom Ea 1

Be prepared for all high-drain and continuous-use applications. Available in your choice of heavy-duty carbon zinc or alkaline types.

Be prepared for all high-drain and continuous-use applications. Available in your choice of heavy-duty carbon zinc or alkaline types.